SA633 Grade E. The SA633 Grade E specification is the Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates when superior notch toughness is needed at low temperatures. Grades C is available up to 4" in thickness and Grade E is available up to 6" in thickness.
ASME SA633/SA633M Grade A Steel Coil
C max | Si | Mn | P max | S max | Cu max |
0.18 | 0.15–0.50 | 1.00–1.35 | 0.035 | 0.04 | 0.05 |
Thickness(mm) | Yield strength (≥Mpa) | Tensile strength (≥Mpa) | Elongation in ≥% | ||
T≤65 | 290 | 430-570 | 200mm | 50mm | |
65<T≤100 | 290 | 430-570 | |||
100<T | - | - | 18 | 23 |
C max | Si | Mn | P max | S max | Cu max |
0.20 | 0.15–0.50 | 1.15–1.50 | 0.035 | 0.04 | 0.01-0.05 |
Yield Strength (MPa) min. | Tensile Strength (MPa) | Elongation in 8 in. min. % | Elongation in 2 in. min. % | ||
345 | 485 - 620 | 18 | 23 |
C max | Si | Mn | P max | S max | Cu |
0.20 | 0.15–0.50 | 0.70–1.35 | 0.035 | 0.04 | - |
Yield Strength (MPa) min. | Tensile Strength (MPa) | Elongation in 8 in. min. % | Elongation in 2 in. min. % | ||
345 | 485 - 620 | 18 | 23 |
C max | Si | Mn | P max | S max | V | Ni max |
0.22 | 0.15–0.50 | 1.15–1.50 | 0.035 | 0.04 | 0.04-0.11 | 0.03 |
Yield Strength (MPa) min. | Tensile Strength (MPa) | Elongation in 8 in. min. % | Elongation in 2 in. min. % | |||
345 | 485 to 620 | 18 | 23 |
Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties.
Read MoreWe stock and supply a wide range of boiler steel plate grades for working environments where safe operating temperature is critical.
Read MoreWe have earned an outstanding reputation for profession in exporting shipbuilding steel.
Read MoreWeathering steel, often referred to by the genericised trademark COR-TEN steel and sometimes written without the hyphen as corten steel
Read MoreAlloy Steel Plate has many applications across many industries. It is easy to weld and has great corrosion resistance.
Read MoreNow more and more world's people foucs on protecting our enviroment,the new clean energy nature gas is widely used through pipelines.
Read MoreStainless steel is a group of iron-based alloys that contain a minimum of approximately 11% chromium..
Read MoreGas cylinder steel main used in gas cylinder products. Better anti-stress capability is a basic performance steel cylinders...
Read More