S355ML
Steel Standard:EN 10025-4
Rolling Type:Structural steel plate,low alloy steel plate
Thickness:6mm-500mm
Width:1500mm-4200mm
Length:3000mm-18000mm
Heat Treatment:Thermo-Mechanical Control Process (TMCP)
TMCP steel plate S355ML under steel standard EN 10025-4.Structural Steel plate S355ML shall be done low temperature impacting test under minus 50 centi degree,and the minimum values of impact energy in J shall be above 27J on longitudinal V-notch test pieces for thermomechanical rolled steel plate S355ML,and the minimum values of impacting energy shall be above 16J on transverse V-notch test pieces for TMCP steel plate S355ML.If the end users need a specific high impact energy for steel plate S355ML when rolling,they should indicate this term in their POs.
Technical Requirements & Additional Services:
Low temperature impacting test
Rolling under standard NACE MR-0175 (HIC+SSCC)
Ultrasonic test under EN 10160,ASTM A435,A577,A578
Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
Shot blasting and Painting,Cutting and welding as per end user’s demands
Mechnical property for S355ML Structural steel:
Thickness (mm) | ||||||
S355ML | ≤ 16 | > 16 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 |
Yield strength (≥Mpa) | 355 | 345 | 335 | 325 | 325 | 320 |
≤ 40 | > 40 ≤ 63 | > 63 ≤ 80 | > 80 ≤ 100 | > 100 | ||
Tensile strength (Mpa) | 470-630 | 450-610 | 440-600 | 440-600 | 430-590 |
Main chemical elements composition of S355ML | ||||||
C | Si | Mn | P | S | Nb | V |
0.14 | 0.50 | 1.60 | 0.025 | 0.020 | 0.05 | 0.10 |
Al(total) | Ti | Cr | Ni | Mo | Cu | N |
≥0.02 | 0.05 | 0.30 | 0.50 | 0.10 | 0.55 | 0.015 |
Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties.
Read MoreWe stock and supply a wide range of boiler steel plate grades for working environments where safe operating temperature is critical.
Read MoreWe have earned an outstanding reputation for profession in exporting shipbuilding steel.
Read MoreWeathering steel, often referred to by the genericised trademark COR-TEN steel and sometimes written without the hyphen as corten steel
Read MoreAlloy Steel Plate has many applications across many industries. It is easy to weld and has great corrosion resistance.
Read MoreNow more and more world's people foucs on protecting our enviroment,the new clean energy nature gas is widely used through pipelines.
Read MoreStainless steel is a group of iron-based alloys that contain a minimum of approximately 11% chromium..
Read MoreGas cylinder steel main used in gas cylinder products. Better anti-stress capability is a basic performance steel cylinders...
Read More