LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS FH32 Shipbuilding steel plate

Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS FH32 shipbuilding steel plate,FH32 shipbuilding steel plate for shipbuiling&platform.The shipbuilding steel plate gradeFH32 is the high tensile strength steel.FH32 shipbuilding steel is the Hull structural steel,with it's good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and welding properties.ASTM A131 FH32 steel plate  can be used in the manufacture of the ship's hull structure whose weight is more than 10000 tons.

FH32 Shipbuilding steel plate specification:
Thickness: 4mm to 260mm, 
Width: 1200mm to 4000mm,
Length: 3000mm to 18000mm.

FH32 shipbuilding steel plate Chemical Composition %

Grade	C max	Si max	Mn	P max	S max	Als min	Ti max	Cu max	Cr max	Ni max	Mo max	N max
FH32	0.16	0.50	0.90-1.60	0.025	0.025	0.015	0.02	0.35	0.20	0.80	0.08	0.009

Note: Generally speaking CE will be ≤ 0.40%. If the delivery condition is TMPC, the CE will be : ≤ 0.36% (thickness ≤ 50mm),≤0.38%( when the thickness >50-100). Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

FH32 shipbuilding steel plate Mechanical Property

Grade	Rm (MPa)	Re(MPa) min	A% min	Akv/J min
FH32	440-570	315	22	E.T °C	Thickness (mm)
				-60	≤ 50		>50-70		>70-100
					L	C	L	C	L	C
					31	22	-	-	-	-

 Note: In the list , Rm: .tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.  

FH32 shipbuilding steel plate Condition Of Delivery

Grade	Fine grains elements	category	The thickness of steel
			≤ 12	>12.5-20	>20-25	>25-35	>35-50	>50-100
FH32	Any	Plate/sheet	N,TM,Q&T					-
		Profile steel	N(25),TM(25),QT*(25),CR*(25)					-

Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2.  The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.

If you want to know more information about FH32 Shipbuilding steel plate, please contact us and let us know your required specification, the best price will be quoted in shortest time.

FH32 shipbuilding steel plate Available Specification

variety		Thickness (mm)	Width (mm)	Longth/ inner diameter (mm)
Shipbuilidng plate	cutting edges	6~200	1500~3000	3000~15000
	non- cutting edges		1300~3000
Shipbuilidng coil	cutting edges	1.2~19	1500~2000	760+20~760-70
	non-cutting edges		1510~2010

FH32 shipbuilding steel plate theoretical weight

Thickness (mm)	theoretical weight		Thickness (mm)	theoretical weight
	Kg/ft2	Kg/m2		Kg/ ft2	Kg/m2
6	4.376	47.10	25	18.962	196.25
7	5.105	54.95	26	20.420	204.10
8	5.834	62.80	28	21.879	219.80
10	7.293	78.50	30	23.337	235.50
11	8.751	86.35	32	25.525	251.20
12	10.21	94.20	34	26.254	266.90
14	10.939	109.90	35	27.713	274.75
16	11.669	125.60	40	29.172	314.00
18	13.127	141.30	45	32.818	353.25
20	14.586	157.00	48	35.006	376.80
22	16.044	172.70	50	36.464	392.50
24	18.232	188.40

FH32 shipbuilding steel plate dimensional deviation

nominal thickness（mm）	The thickness deviation with following width (mm)
	≤1200	>1200~1500	>1500~1800	>1800
>6.0~8.0	±0.29	±0.30	±0.31	±0.35
>8.0~10.0	±0.32	±0.33	±0.34	±0.35
>10.0~12.0	±0.35	±0.36	±0.37	±0.43

nominal thickness（mm）	minus deviation (mm)	The thickness deviation with following width (mm)
		> 1000 ~1200	> 1200 ~1500	> 1500 ~1700	> 1700 ~1800	> 1800 ~2000	> 2000 ~2300	> 2300 ~2500	> 2500 ~2600	2600 ~2800	> 2800 ~3000
>12~25	-0.8	+0.2	+0.2	+0.3	+0.4	+0.6	+0.8	+0.8	+1.0	+1.1	+1.2
>25~30	-0.9	+0.2	+0.2	+0.3	+0.4	+0.6	+0.8	+0.9	+1.0	+1.1	+1.2
>30~34	-1.0	+0.2	+0.3	+0.3	+0.4	+0.6	+0.8	+0.9	+1.0	+1.2	+1.3
>34~40	-1.1	+0.3	+0.4	+0.5	+0.6	+0.7	+0.9	+1.0	+1.1	+1.3	+1.4
>40~45	-1.2	+0.4	+0.5	+0.6	+0.7	+0.8	+1.0	+1.1	+1.2	+1.4	+1.5